Aluminum Cut Wire Shot
Send Email
Home
» Aluminum Cut Wire Shot
Aluminum Cut Wire Shot
Price : ₹ 60 - 100 /kg
Key Specifications
| Brand Name | Abrasive Grit |
| Material | Aluminum Cut Wire Shot |
| Packaging Size | 25kg / 50kg / 1 Ton Jumbo Bag |
| Size(mm) | 0.6 - 2.0 MM |
| Usage | Surface Preparation, Cleaning, Peening, Deburring |
Applications
Product Description
Company Profile
- The Aluminum Cut Wire shot is primarily used for blast cleaning, surface finishing, and deburring of aluminum castings and forgings. It is extremely long-lasting and leaves no ferrous trace on the substrate.
- An aluminum cut wire shot is used to clean aluminum or nonferrous castings with a brighter satin finish.
- Cleaning aluminum or other nonferrous castings that require a satin finish while removing parting lines. It is utilized for shot blasting aluminum die castings, shot blasting magnesium die castings, shot blasting aluminum forgings, and so on.
Advantages of Aluminum Cut Wire Shot
- Most economical and lowest consumption.
- Consumption 3-4 times less compared to cast steel shots.
- No dust formation.
- Faster cleaning.
- Environmental friendly.
- Uniform hardness.
- Stabilized grain size.
- Increased fatigue life of blasted parts.
Applications Aluminum Cut Wire Shot
- Surface finishing.
- Obtain a profile pattern.
- Shot peening.
- Shot blasting.
- Grit removal.
- Pre-treatment.
- Rust removal.
- Blast cleaning.
Additional Information:
- Minimum Order Quantity: 100 Kilogram
Available Sizes
| AG | AG-170 | AG-190 | AG-230 | AG-280 | AG-280 | AG-360 | AG-390 | AG-460 | AG-550 | AG-660 |
| Equivalent Size(in mm) | 0.4 | 0.5 |
0.6 |
0.7 | 0.8 | 0.9 | 1 | 1.2 | 1.4 | 1.6 |
| Cut Wire Shot range(in mm) | 0.3-0.5 | 0.4-0.60 | 0.5-0.7 | 0.6-0.8 | 0.7-0.9 | 0.8-1.1 | 0.8-1.2 | 1-1.4 | 1.2-1.6 | 1.4-1.8 |
Hardness
| Type of Material | Material Used | HRB |
| Aluminum |
Wire Types 4043-5356 full hard wire types 1100-1350 full hard |
40-70 20-40 |
Aluminum Cut Wire Shot Manufacturer
We offer abrasive shots; Steel Shot, SS Shot, Steel Grit, Garnet sand, Quartz shot, Aluminum oxide, glass beads blasting for stainless steel, etc, and a qualitative range of industrial steel abrasive products.
To enable us to quote for your requirement, kindly give us the following info –
1. Particle size required (You may choose from above or give your own range).
2. Packing required.
3. Quantity required with the delivery schedule.
4. Destination port.
5. Payment terms.
6. Discharge rate at the destination, if in break-bulk.
7. Any other point that may impact the quote.
We can also offer ungraded material for shipments in bulk in any quantities as desired by our buyers on FOB or CNF FO basis terms.
Our Milestones
Payment Terms
LOCATIONS
